Tester Update

Update N-Link Firmware

Plug your N-Link device into a USB port and click install. Your browser will ask which serial port to use.

Latest version

v1.1.8

Fixes a Bluetooth dropout during high-rate streaming. Under heavy CAN traffic (many active IDs) the link could silently stall and disconnect after ~30 seconds; Bluetooth responses are now paced and reliably delivered so the connection stays stable. Recommended for all users.

Your browser doesn't support Web Serial. Open this page in Chrome or Edge on a desktop computer.Web Serial is blocked. This page must be served over HTTPS and the user must grant serial-port permission.

Requires Chrome, Edge, or another Chromium-based browser on desktop. Web Serial is not supported on Safari, Firefox, iOS, or Android.

How to flash

  1. Disconnect the N-Link from your vehicle's CAN port and connect it to your computer over USB.
  2. Close any other app that may be using the serial port (Arduino IDE, PlatformIO, the previous flasher window, etc.).
  3. Click Installabove and pick the device's serial port from the browser prompt.
  4. Wait for the flash to finish — do not unplug. The device will reboot when complete.

Trouble flashing?

  • If the install button doesn't open a port picker, try a different USB cable — some cables are charge-only.
  • If flashing fails partway through, hold the BOOT button while clicking Install, then release after the port picker appears.
  • Still stuck? DM us your browser, OS, and any error text from this page.